UBNT

How to Hard Reset Ubiquiti Powerbeam M5 300

You can easily Factory Reset Ubiquiti Powerbeam M5 300. You can also reset any power beam model with this method.

Please note, Hard reset deletes all data and settings. So before resetting, backup system configuration.

 

 

Reset with Button in antenna Feed

Reset button located in the antenna feed. To perform a Factory reset, follow below steps.

  • First, Power on your Ubiquiti power beam device.
  • Then press and hold the Reset button for more than 10 seconds with sensitive material.
  • Release button when lights are blinking.
  • Wait for a while, You device will be reset and reboot automatically.

Power Beam antenna feed reset button

 

 

 

Reset with Button in PoE adapter

Reset button located on the back side of the Poe adapter. To perform a Factory reset, follow below steps.

  • First, Power on your Ubiquiti power beam device.
  • Then press and hold the Reset button for more than 10 seconds with sensitive material.
  • Release button when lights are blinking.
  • Wait for a while, You device will be reset and reboot automatically.

Ubiquiti PoE adapter reset button

 

 

Reset from airOS Control Panel

If you unable to reset with button, You can use this method to Factory Reset your power beam device.

  • Login to airOS control panel (Default Ip 192.168.1.20).
  • Then click on System tab.
  • Now you can see configuration management.
  • Click on the Reset button.
  • Finally, wait for a while, You device will be reset to factory default settings.

Ubiquiti airOS system tab for Reset

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *