AirLive

Airlive WL-5460 Router – How To Reset To Factory Defaults Settings

Airlive WL-5460 Router Reset To Factory Defaults. You can easily reset your wireless WiFi router.  Here we are also provide Reboot methods of AirLive routers. You must reset your Wireless router to the factory defaults settings if you have forgotten your router user name or password. And you need to reboot your device if your router does not works properly.

 

This post will detail how to reset back to a factory default configuration the Airlive WL-5460. If password have been forgotten and or access to the AirLive Router is limited or configurations have been done incorrectly, resetting back to the factory default settings can assist. And also provide How to change router wireless password.

 

Difference between Reset and Reboot :

There is a big difference between Resetting a router and Rebooting a router. Reboot means, cycle the power to Router or Refresh the router. Resetting involves changing the router settings back to its factory defaults. Perhaps you have forgotten the password of your AirLive router and now you want to reset the password. First you need to Hard Reset the router then you can use the default password to access your router.

 

When you reset your router the following settings will be changed:

  • AirLive Router username and password
  • Wi-Fi username and password
  • ISP ip addresses and DNS
  • Any firewall settings you have made
  • Any portforwards you have set up
  • Generally, any configuration or settings changes that you have made to your router.

 

 

How To Reset Airlive WL-5460 Router With Button :

To perform a factory reset, please follow Below steps.

  •   Power on the AirLive Router, place a paper clip or Pin into the hole on the back of the Router labeled Reset.
  •   Hold paper clip or pin down for 10 to 15 seconds and release.
  •   The Router will reboot on its own. Once the WLAN light stops blinking, the Router is reset.

AirLive router reset button

Note : Resetting the AirLive router does not reset the firmware to an earlier version. It will only change all settings back to factory defaults.

 

AirLive Default Settings  :

Once your AirLive router has been reset, it goes back to it’s factory defaults Settings.

  • IP address: 192.168.1.254  or 192.168.1.253 or 192.168.1.252
  • Username: admin or root
  • Password: airlive or leave this box blank

 

 

How To Reset Airlive WL-5460 Router From Admin Control Panel  :

Find Your AirLive Router IP Address. You need to know the Internal IP Address of your Airlive WL-5460 router before you can login to it. By default the IP is 192.168.1.254. The Airlive WL-5460 has a web interface for configuration. You can use any web browser (such Firefox and Chrome) you like to login to the AirLive Router. Open your browser then Type

  • IP address: 192.168.1.254  or 192.168.1.253 or 192.168.1.252
  • Username: admin or root
  • Password: airlive or leave this box blank

Now you can see the Airlive WL-5460 Home Screen. If you see this screen, then congratulations, you are now logged in to your AirLive wireless router.

  • First, try to find Reset or restore settings in Router home screen.
  • Generally Reset settings placed in Maintenance tab or Tools tab.
  • Then click on Restore or Reset button.
  • Wait for a while, Now you are done Factory Reset successfully.

 

Solutions To Airlive WL-5460 Login Problems :

If you can not get logged in to your Wireless router, here a few possible solutions you can try.

Forgot Password to Airlive WL-5460 Router

If your Internet Service Provider or ISP supplied you with your router then you might want to try giving them a phone call and see if they either know what your AirLive router’s username and password are, or maybe they can reset it for you.

How to Reset the Airlive WL-5460 Router To Default Settings

If you still can not get logged in then you are probably going to have to Hard reset your router to its default settings.

 

 

How to Reboot your AirLive Router :

Rebooting a router means cycling the power to it or refresh the router. If you want to reboot your router, follow below steps.

Method 1 :

  • Unplug the power connector from the back of the AirLive router and plug it back in.
  • Wait above 20 seconds for the router to reboot.
  • Your internet connection may be drop when your wireless router is rebooted. If someone is using a computer on your network to access the internet, you may want to warn them.

 

 

 

How To Change The AirLive Router Wi-Fi Password :

WiFi Terms Explanation :

Wireless Name : Wireless network (WiFi) needs to have a name to uniquely identify it from other wireless networks.

Wireless Password : An important part of securing your wireless network (WiFi) is choosing a strong password.

Wireless Channel : Changing a WiFi channel is not always a simple task. Be sure to read about WiFi channels before changing this option. So make it default option.

Encryption : You should definitely pick WPA2 for your networks encryption. It’s best security encryption.

 

Follow below steps to change your Router WiFi Password :

  1. Open an Internet browser (Firefox or Chrome) and enter “192.168.1.254” without quotes into the address bar. Press “Enter” to go to the AirLive Wireless router configuration page.
  2. Then login to Your router Home screen.
  3. First, select “Wireless Settings” in the welcome screen, or click on the “Operation Mode” on the top menu.
  4. Scroll down to find the Pre-Shared Key or Network Key field.
  5. Finally Type a new Wi-Fi password in the Pre-Shared Key or Network Key field. Then click on “Save Settings”. Close the window to save the new password.

Note : Some router have two radio options like 2.4Ghz and 5Ghz. Please select required one before making changes.

 

 

AirLive Customer Support :

If you are still having problems, contact AirLive customer care department. Follow below links.

 

Customer Support (For Global Users)

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *